Char-Broil Patio Caddie Serie Instructions D'assemblage Et D'entretien page 9

Items to Assemble
7
1 Base Assy
6 Machine Screws (#10-24x1")
6 Lock Nut (#10-24)
Base Assy
Qty: 6
Qty: 6
Leg with handle must be
opposite to wheels in base.
Items to Assemble
8
1 Heating Element
2 Self-Tap Screws
Qty: 2
Turn upside down to assemble base.
A) NOTE: Leg with handle must be opposite wheels in base.
B) Slide legs into slots in base support, attach each leg with (2) #10-24x1"
Machine screws and (2) #10-24 lock nuts.
A
A) IMPORTANT: Orient heating element so that the notch is on top. ("BOTTOM" is stamped on underside of
bracket.) Slide element bracket through slot in side of insulation bowl and into rectangular slot in grill
body. Element bracket mounts snugly against inside of grill body. Attach using (2) #12x1/2" self-tap
screws from outside of grill bottom through element bracket holes on inside of grill bottom.
B) Push insulation side flaps down flush with bowl.
A
Heating Element
Base Assy
B
#10-24x1"
Machine Screw
#10-24
Lock Nut
Attach each leg using
screws and nuts as shown.
Complete upright view
#12 x 1/2"
Sheet Metal Screw
B
9