Char-Broil Patio Caddie Serie Instructions D'assemblage Et D'entretien page 7

Items to Assemble
3
3 Lid Hangers
3 Self-tap Screws
Qty: 3
May be factory assembled.
Items to Assemble
4
1 Grill Bottom
1 Bottom Insulation Bowl
A) Place lid hanger bracket on upper lip of insulation bowl. Note: Adjust insulation bowl as necessary to align.
B) Secure lid hanger brackets with (1) #12x1/2" self-tap screw for each hanger.
C) Tighten wing nut from Step 2.
Lower end of lid hanger
bracket must rest on upper
lip of insulation bowl.
A Fold flaps inwards and upwards (90 degrees) so they are horizontal
B Align rectangular slots
C Push insulation bowl tabs down and under to temporarily hold bowl in place while you work.
B
A
A
Grill Bottom
B
Repeat for all three holes
Bottom Insulation Bowl
C
7