Domo DO718K Mode D'emploi page 46

2. Remove the drip pan from the appliance. Empty the coffee grounds reservoir. Clean both the drip
pan and the coffee grounds reservoir with clean water. Dry both thoroughly. They can also be
cleaned in the dishwasher.
3. Open the maintenance door. Remove the brewing unit by pressing both buttons on the side of the
brewing unit and pulling it towards you. Clean and dry the brewing unit with clean water.
! Attention: never clean the brewing unit in the dishwasher.
4. Clean the housing with a clean, damp cloth. Use the supplied cleaning cloth to wipe the touch panel.
5. Use the cleaning brush to clean the coffee residue from around the internal outlet of the coffee mill.
6. Return everything to its original position. If a part is not (properly) installed, the appliance will
indicate this on the display. See "parts" section for an explanation of the indicator lights.
! Never immerse the appliance, power cord or plug in water or any other liquid. This is to prevent
electric shock or fire.
! Never use an aggressive or abrasive cleaning agent.
DESCALING
If the descale the appliance indicator light is on, you must descale the appliance.
1. Fill the water tank up to the maximum indication.
2. Add 1 sachet of descaling solution to the water tank. 3 bags are supplied with the appliance.
Additional descaling product can be obtained from the website: www.webshop.domo-elektro.be
3. Plug the power cord into a socket.
4. Place a collection reservoir under the coffee spout. Make sure the reservoir has the same capacity as
the water tank.
5. In standby mode, press and hold the on/off button and espresso key simultaneously for 5 seconds.
You will hear a beep and the descale the appliance and espresso lights will flash.
6. Press the espresso key to confirm the descaling process. If you do not want to carry out the
descaling operation, press the on/off button to return to hibernation mode.
7. The descaling process indicator light flashes and the appliance will start descaling. The water with
descaling product comes out of the spout in phases. The whole process takes a few minutes.(± 20
min.)
46
DO718K
1 2
4
3
6