Domo DO718K Mode D'emploi page 42

INSTALLATION
Remove all packaging materials and any promotional stickers before using the appliance for the first time.
1. Place the appliance on a flat, stable surface. Provide adequate space around the appliance for
ventilation.
2. Put the drip tray in place. Make sure this is correctly installed.
3. Fill the water reservoir. See "use/fill water tank" section.
4. Fill the bean reservoir. See "use/fill bean reservoir" section.
5. Plug the electrical cable into the cable connector on the appliance. Plug the plug into an electrical
socket.
Before the first use, it is recommended that a cup of hot water is made first in order to rinse out the pipes.
See "use" section.
150mm
USE
1. Turn the appliance on. Press the on/off button. The appliance will rinse automatically. A cup of hot
water will come out of the spout. The appliance then goes into standby mode. In standby mode, all
indicator lights are on and the appliance is ready for use.
Note: automatic rinsing will only occur if the appliance has been turned off for an extended period of
time.
2. Place a cup under the coffee spout. You can adjust the height of the spout to the height of your cup
by lifting it up or down. For a small cup, use the drip tray. If you use a larger cup, you can remove the
drip tray.
3. Choose your desired coffee and press the key for an espresso, lungo, americano, hot water or your
favourite setting.
Note: you can set the amount of coffee yourself using the keys. See "adjust volume" and "favourite
setting" sections.
42
DO718K
Indicator light on: coffee grounds reservoir full
Indicator light flashing: drip pan not installed
Indicator light on: brewing unit not inserted (correctly)
Indicator light flashing: maintenance door is not installed (correctly)
Indicator light on: descale the appliance
Indicator light flashing: descaling process in progress
The process for emptying the appliance is in progress. See "cleaning and
maintenance/emptying the appliance" section
1 2 3 4 5