peerless-AV FPE47F-S Installation Et Montage page 5

Optional Removal of Bay Door
• Grasp bay door fi rmly. Bay door will swing freely when gas springs are removed.
Bay door may be removed for ease of installation
1
to mounting surface. NOTE: Removal of bay door
is optional. Installation may be completed without
removing bay door.
Insert fl athead screwdriver under brass clip of gas
spring shown in detail 1 and pry up. NOTE: Do not
remove brass clip from gas spring. Pull gas spring
away from bay door.
1-1 Remove center set of 10-24 x .5" phillips screws
from inside of enclosure assembly (A) as shown in
fi gure 1.1. Slide bay door to the right to disengage
hinges and lift off of enclosure assembly.
All manuals and user guides at all-guides.com
WARNING
5 of 50
BRASS CLIP
BAY DOOR
MAIN
ENCLOSURE
ASSEMBLY
GAS SPRING
BRASS CLIP
DETAIL 1
A
10-24 x .5"
PHILLIPS SCREWS
ISSUED: 07-12-10 SHEET #: 061-9056-8 03-05-13
fi g. 1.1