Publicité
Les langues disponibles
Les langues disponibles
Installing the blade
1. Ensure the blade is suitable for your tool.
2. Make sure that the direction of the arrow on the blade matches the direction of rotation arrow found on the tool's blade guard. The blade teeth should
always point downwards at the front of the saw.
3. Using the blade slot to provide maximum clearance and access to the tool, carefully and gently move the blade up into the machine and attach it on the
inner blade flange.
4. Reinstall the outer blade flange, washer and arbor screw.
5. Tighten the assembly by hand.
6. Hold the outer blade flange with the bayonet spanner.
7. Tighten the arbor screw with the 6mm hex key.
8. Check the blade spins freely by rotating by hand.
9. Close the retractable blade guard around the blade so the blade teeth are completely covered.
10. Reattach the retractable blade guard using a cross screwdriver to its original position using the pivot screw.
11. Check the installation, particularly fort he operation of all safety guards.
ENVIRONMENTAL DISPOSAL
In order to avoid damages on transportation, the tool has to be delivered in solid packaging. Packaging as well as the unit and accessories are made of
recyclable materials and can be disposed accordingly. The tool's plastics components are marked according to their material, which makes it possible to remove
environmental friendly and differentiated because of available collection facilities.
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with
national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
WWW.NIKOLAOUTOOLS.GR
EN
11
Publicité
