11_Virtual Gear Shifter; Emergency Stop; 13_Stand Alone Mode - Elite FUORIPISTA Mode D'emploi

EN
which will lock the flywheel in a few seconds - meanwhile
the "Emergency Stop" (Pic. 26) message will appear on
the display.
The brake is automatically released after 10 seconds.
PLEASE NOTE: the brake is disabled in the first 10 seconds
since bootup.
In case of emergency stop, you may hear a noise coming
from the braking device which is due to the exceptional
braking action requested with the button.

11_VIRTUAL GEAR SHIFTER

FUORIPISTA features two levers on its front, which have
different functions based on the selected workout mode.
In the Stand-Alone mode you can manually adjust the
brake (check out chapter 13_STAND ALONE MODE),
while in simulation mode you can adjust the gear shifter
as you do in regular bicycles. This is the best way to select
the appropriate gear to face the courses on simulations.
Gear shifter is virtual but, just like a real gear shifter, it
affects the metric development of your pedalling, that is
each stroke increases or decreases the distance covered.
Therefore, with the same pedalling cadence, by changing
the gear, the speed changes and resistance follows suit,
STAND ALONE - POTENZA just like on the road.
The left lever (Ref. L) (Pic. 20) virtually manages the front
chainring derailleur while the right lever (Ref. R) (Pic. 20)
manages the rear derailleur of the sprocket set. The default
configuration sets an 11-speed gear shifter.
These are impulsive-type levers so by moving them one
way or the other they will virtually increase or decrease the
derailleur gear, the pre-set gear is displayed along with the
number of teeth of the front and rear chainring.
PLEASE NOTE: the virtual gear shifter only works with
ARRESTO EMERGENZA
FUORIPISTA connected to a software or app while working
out in simulation mode (RealVideo, maps, gradient
workout).
EMERGENCY
STOP
12_DISPLAY
The front of the product features an OLED display (Ref. M)
(Pic. 20) with the main info on FUORIPISTA current status:
- Battery level (how much power is left or if it's recharging)
F
- Protocol employed (ANT+, Bluetooth)
34 15
- Modes:
ANT
LEV = Level mode (Pic. 21);
SIM
ERG = ErgMode/Power (Pic. 22);
SIM = simulation (Pic. 23);
- Power output (Pic. 24);
PWR
- Virtual Gear (only in Simulation mode) (Pic. 23);
SET W
- Periodic Brake calibration info
chapter 26_SERVICE FUNCTIONS;)
160 155
22
LEV
R
ANT
SIM
(please check out
- Other service functions (Zero sensor, brake calibration,
FW update, pad replacement).
When an app or software manages FUORIPISTA via the
34 15
ANT+ FE-C protocol the related text ANT
SIM
however with the Bluetooth protocol the logo
displayed. (PLEASE NOTE: they both may appear when
using ANT+ FE-C and any Bluetooth profile at the same
time).
When one of the two protocols (ANT+ or Bluetooth) is not
SET
in use or there's a disconnection the related symbol blinks.
After 10 seconds of no connected software or apps 160
FUORIPISTA enters the STAND ALONE mode. Now the
ANT+ and Bluetooth logos are turned off and you can
workout without connecting to other devices. Please check
paragraph 13_STAND ALONE for further info.
SET
After 3 minutes of inactivity in stand-alone mode
FUORIPISTA enters the energy saving mode.
9

13_STAND ALONE MODE

When FUORIPISTA is in stand-alone mode (that is, not
connected to apps or software) the functionality of the two
levers changes.
The left lever (Ref. L) adjusts 17 different braking levels
STAND ALONE - LIVELLI (0 to 16). Resistance is dependent on pedalling speed
and changes along with speed changes. The LEV text is
displayed above with the set level and instant power output
displayed below (Pic. 21).
The right lever (Ref. R) (Pic. 20) allows power workouts with
a pre-set goal. The brake assembly adapts so the cyclist
can face the preset resistance, regardless of pedalling
speed.
On the display (Ref. M) (Pic. 20) the ERG text appears, the
preset power and instant power output (Pic. 22).
PROCEDURA CALIBRAZIONE
14_ USING FUORIPISTA WITH SOFTWARE /
APPS / DEVICES
When working out we suggest using the My E-Training
OFFSET PROCEDURE
software / app, available for iOS, Android, Windows and
NOT PEDALING
Mac OS. My E-Training is a complete system with several
different workout modes, such as video, configurable
programs, Google Maps courses, online competitions and
many more.
It is possible to use a third party software, provided that
it's compatible with the home trainer communication
standards. There are many apps / software / devices on
the market that connect to FUORIPISTA.
Please follow the related instructions to connect said
software / app / device to FUORIPISTA.
Before using any app and beginning the connection
procedure make sure that FUORIPISTA is on (by pressing
the emergency button on the Display area) and hasn't
STOP
EMERGENCY
STOP
F R
F R
ANT will be displayed,
SIM
34 15
ANT
SIM
PWR
W
PWR
155
SET W
160 155
LEV
W
LEV
207
SET W
9 207
SIMULAZIONE
OFFSET P
NOT PE
will be
ANT
SIM
OFFSET
2410