Samsung MX-JS8000 Guide D'utilisation page 19

TV SoundConnect
You can listen to the sound from your
SoundConnect Compatible Samsung TV
through the Hi-Fi Component by using the TV
SoundConnect function.
To connect the Hi-Fi Component to a
SoundConnect Compatible Samsung
TV
Before activating this function, be sure to set the
Samsung TV's SoundConnect or SoundShare
function to On.
1. Press the TV SoundConnect button of
the Hi-Fi Component to display the TV
SOUNDCONNECT message.
WAIT SEARCH
2. Set Add New Device to On in the TV's
SoundConnect Settings menu. (Refer to the
TV's user manual for details.)
3. When the Hi-Fi Component is connected
to the TV, it will display [TV] Name
CONNECTED
4. The audio from the connected TV plays over
the Hi-Fi Component system.
| NOTES |
✎ The SoundConnect feature is available on some
Samsung TVs released since 2012. Check
whether your TV supports the SoundShare or
SoundConnect function. (For further details,
refer to the TV's user's manual.)
✎ If you unplug the Hi-Fi Component, the TV
SoundConnect connection is terminated. To
re-establish the connection, plug the Hi-Fi
Component into an outlet, and then set the TV
SoundConnect connection again.
✎ Only one Hi-Fi Component can be connected
to a TV via TV SoundConnect at time.
✎ To connect to another TV in TV SoundConnect
mode, press the
seconds, and then connect to the other TV by
following the directions above.
MX-JS8000-ZC_ENG-0412.indd 19 MX-JS8000-ZC_ENG-0412.indd 19
All manuals and user guides at all-guides.com
REQUEST
TV on the front display.
button for more than 5
19
To disconnect the TV from the Hi-Fi
Component
You can disconnect the TV from Hi- Fi
Component.
For instructions, see the TV's user manual.
• When the Hi-Fi Component is disconnected
from the TV, the Hi-Fi Component displays
DISCONNECTED REQUEST on its display.
To disconnect the Hi-Fi Component
from the TV
Press another mode button on the front panel
of the Hi-Fi Component to switch from TV
SoundConnect mode to another mode or turn off
the Hi-Fi Component. The currently connected
device is disconnected.
| NOTES |
✎ The connected TV will wait a certain amount
of time for a response from the Hi-Fi
Component before terminating the connection.
(Disconnection time may differ, depending on
the TV)
✎ The connection may be lost or sound may
stutter if the distance between the TV and the
Hi-Fi Component exceeds 6.5 feet (2 m).
✎ Instability in the network environment may
cause the connection to be lost or sound to
stutter.
✎ The Hi-Fi Component automatically turns off
after 25 minutes if it is not connected to a TV.
English
2016-04-12 2016-04-12 10:16:49 10:16:49