Publicité
Les langues disponibles
Les langues disponibles
RELEASING THE GEARMOTOR
⚠ This procedure must be done with the main power cut off.
The gearmotor's manual release may cause unwanted movement of the gate, if the latter has any mechanical
issues or if it is not balanced.
RELEASING
❶
LOCKING
❶
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
It neither opens
• Power supply is missing
nor closes
• The gearmotor is stuck
• The transmitter's battery is run down
• The transmitter is broken
• The stop button is either stuck or broken
• The opening/closing button or the key-switch
selector is stuck
The gate opens
• The photocells are dirty
but does not
close
❷
❷
❸
❸
FIXES AND REMEDIES
• Check main power supply
• Call assistance
• Replace the batteries
• Call assistance
• Call assistance
• Call assistance
• Clean and check proper working
state of photocells
• Call assistance
Publicité
