Bushnell ImageView 111545 Manuel D'instructions page 10

All manuals and user guides at all-guides.com
Main Menu-oPtions and settinGs
the Main Menu-options and settings
As mentioned earlier in this manual, your ImageView spotting scope is already set for high resolution and
quality right out of the box. Exposure, white balance, and other variables are set automatically. This means
that you will get good results for most subjects and lighting without the need to go into the menu to change
any settings. However, we recommend that you become familiar with the options available in the Setup
Menu (Fig.2, DISPLAY ICONS/MENU SCREENS) so that you can improve your photos if, for example, you decide they are
coming out too dark (common for snow scenes with most cameras), or too blue (on an overcast day or in the
shade). Here are the steps for changing the settings of some of the most commonly used options:
setting the Menu Display language
(English, French, Spanish, German, Italian, Portuguese, Chinese 1, Chinese 2)
This option allows you to select your preferred language for all menu screens. Raise the LCD display and
(G)
press the on/oFF button. Press the MenU button to enter the Setup Menu. Press the Up arrow key 3
(A) (B) (C)
times to highlight "Language", press oK/plaY , select your language with the Up/DoWn arrow keys, then
(D)
press oK/plaY to confirm the setting. Press MenU to return to Still Photo mode (live preview screen).
setting the Date and time/imprint option
This setting will ensure that the date and time will be correct, and provides the option to imprint it on your
photos/videos. After pressing MenU to enter the Setup menu, use the Up/DoWn arrow keys to highlight
"Date", and press the oK/plaY button. Select "Set Date", press oK/plaY. Set the date and time, using the Up/
DoWn arrow keys to make changes, and pressing the snap button to lock in each setting and move to the
next field. Note: the time setting uses the 24 hour format (2 PM=14). Finally, select the date format you prefer
(e.g., MM/DD/YY).
10