Listening To The Radio/Siriusxm; Listening To The Radio; Storing Manually - Sony XSP-N1BT Mode D'emploi

Magnetic
charging
connector
Notes
 Place your smartphone before driving. A traffic
accident may result if you set a device while driving.
 Closing the USB cover is recommended when a
smartphone is placed on the unit.
 If a smartphone wobbles on the unit, it may fall from
the unit while driving and cause malfunction. To
prevent this, place the device properly.
 Depending on the shape of a smartphone case, the
unit may not hold the smartphone stably and
securely. In such circumstances, remove the
smartphone case.
 Be careful not to knock a smartphone, especially
under the following circumstances.
 Placing/removing a smartphone.
 Pushing down the cradle clamp to secure a
smartphone in place.
 Opening/closing the USB cover while a
smartphone is placed on the unit.
 Do not forcefully push a smartphone while it is placed
on the unit.
10
GB

Listening to the Radio/SiriusXM

Listening to the Radio

To listen to the radio, press SOURCE to select
[TUNER].
Storing automatically (BTM)
1
Press MODE to change the band (FM1,
FM2, FM3, AM1 or AM2).
2
Press and hold MENU.
3
Press / to select [GENERAL], then
press ENTER.
4
Press / to select [BTM], then press
ENTER.
The unit stores stations in order of frequency on
the number buttons.
Tuning
1
Press MODE to change the band (FM1,
FM2, FM3, AM1 or AM2).
2
Perform tuning.
To tune manually
Press and hold / to locate the approximate
frequency, then press / repeatedly to fine
adjust to the desired frequency.
To tune automatically
Press /.
Scanning stops when the unit receives a station.
Repeat this procedure until the desired station
is received.

Storing manually

1
While receiving the station that you want
to store, press and hold a number button
(1 to 6) until [MEM] appears.
Receiving the stored stations
1
Select the band, then press a number
button (1 to 6).