Publicité
Les langues disponibles
Les langues disponibles
Smart-RTC+
4.5.2 Heat pump manager
The function of the Smart-RTC+ room control must be activated
in the heat pump manager menu.
The preconfiguration menu can be accessed by
simultaneously pressing (for approx. 5 seconds) the key
combination (ESC) and (MENU).
The preconfiguration is exited via the (ESC) key.
Heating
Control by
Cooling
Room control
Numbers
Room control
An overview of the RTM Econ A⁄U in the BUS is available in the
menu "history - add-ons - Smart-RTC+".
The "history" menu can be accessed by
pressing the MENU key (for approx. 5 seconds) and making
the selection with the arrow keys
The menu is exited via the (ESC) key.
Symbol
X
RTM Econ not selected
RTM Econ present and active
RTM Econ in shock ventilation
Searching for RTM Econ
RTM Econ not found
RTM Econ reset, re-initialisation
Reset RTM Econ time programs
All manuals and user guides at all-guides.com
Preconfiguration of all system components
Is heating circuit 1 used for heating or for heating and silent cooling?
The following heating regulation options can be selected for heating circuit 1:
return temperature control depending on the room
temperature of a reference room
What hardware is used for the heating room control?
What hardware is used for the cooling room control?
How many Smart-RTC+ are present in heating/cooling circuit 1?
Description
452115.66.39 · FD 9707
NOTE
If communication cannot be established, the address set on the
RTM Econ A⁄U and the BUS line must be checked. If these settings are
correct, a 120 Ohm terminating resistor and a ferrite core if necessary
must be mounted too.
RTM Econ
X
50
X
X
53
X
X
56
English
Setting range
Heating
Heating/silent cooling
Room temperature
Smart-RTC+
Smart-RTC+
1 ... 10
Display
X
51
52
X
54
55
X
X
57
58
59
EN-9
Publicité
