Common Issues
Problem
Solution
• The battery level is low. Put the robot on the charging dock and charge it before use.
Unable to power on
• The battery temperature is too low or too high. Only use the robot within the range of 4-40°C (39-104°F).
• Check the power indicator light turns on and that both ends of the power cable are properly connected.
Unable to charge
• If contact is poor, clean the contact areas on the charging dock and the robot.
• When used at high or low temperatures, the robot will automatically reduce its charging speed to extend battery life.
Slow charging
• The charging contacts may be dirty. Wipe them with a dry cloth.
• There are too many obstacles near the charging dock. Move it to an open area.
Unable to dock
• The robot is too far from the charging dock. Place it closer and retry.
Abnormal behavior
• Restart the robot.
Noise during
• The main brush, side brush, main wheels, or omnidirectional wheel may be jammed. Turn off the robot and clean them.
cleaning
• VibraRise system abnormal. Check for jammed objects.
• WiFi is disabled. Reset the WiFi and try again.
• The WiFi signal is poor. Move the robot to an area with good WiFi reception.
Unable to
• Abnormal WiFi connection. Reset the WiFi, download the latest mobile app, and retry.
connect to WiFi
• The current Roborock robot is not supported. You can find supported models in the app.
• Unable to connect to WiFi abruptly. There may be an error with your router settings. Contact Roborock customer
service for additional support.
• The dustbin is full and needs emptying.
Poor cleaning ability
• The filter is blocked and needs cleaning.
or dust falling out
• The main brush is jammed and needs cleaning.
Scheduled cleaning
• Keep the robot charged. Scheduled cleaning can only begin when the battery level is above 20%.
is not working
12