Maintenance Of The Acrylic - Balboa VL600S Manuel D'utilisation

MAINTENANCE INSTRUCTIONS OF THE SPA ENG
Cleaning of the skimmer filter:
1.Disconnect the electrical equipment.
2
Differential in OFF position
3
2. Pull the top of the skimmer
3. Remove the cartridge
4. Clean the cartridge with water at low pressure.
Remember to follow all the steps and to close the valve in order not to damage the Spa or
hurt yourself.

4.3. MAINTENANCE OF THE ACRYLIC

Easy care for an elegant surface:
• Use common cleaners for general use. For normal care and cleaning, use a soft cloth or sponge
with a little soap and water. Rinse it well, and dry with a clean, dry cloth. If you are using a
household cleaner, please ensure it is recommended for acrylic surfaces by the manufacturer.
• Never use abrasive cleaners.
• Do not allow the acrylic surface to come into contact with ketones or esters such as acetone,
acetates (such as nail varnish remover, nail varnish or dry cleaning substances) or any organic
solvent with chlorine, varnishes, petrol, aromatic solvents, etc.
• Remove dust, smears and dry dirt with a soft, moist cloth.
• Clean off grease, oil, paint and ink stains with isopropyl alcohol and dry it with a clean, dry cloth.
• Avoid using razors or any other kind of sharp instrument that could scratch the surface. Small
scratches can be removed by applying a fine layer of automotive varnish and lightly polishing it
with a clean cloth.
Once a week, clean the area of the Spa which is not underwater with a quality polish for Spas.
Remember: never leave the Spa uncovered and exposed to sunlight, as this
could cause damage not covered by the guarantee.
29