Maintenance Instructions Of The Spa; Renewing The Spa Water; Maintenance Of The Filter - Balboa VL600S Manuel D'utilisation

MAINTENANCE INSTRUCTIONS OF THE SPA

4. MAINTENANCE INSTRUCTIONS OF THE SPA
The Spas are built with maximum quality and with the hardest wearing materials available.
Proper care and maintenance will ensure a long life-span of the Spa and its components.

4.1. RENEWING THE SPA WATER

To change the Spa water:
• Disconnect the electrical equipment, placing the differential switch (installed in the main input
of the home) in the OFF position.
• Locate the drain valve (see Spa drainage of the Installation Manual) and turn the valve to the
OPEN position. The Spa will empty by gravity through the general drain.
• Once the Spa is empty, inspect the acrylic and clean if necessary (see point 4.3. Maintenance of
the acrylic). Turn the drain valve to the CLOSED position.
• Fill the Spa with clean water (see Filling the Spa of the Installation Manual.

4.2. MAINTENANCE OF THE FILTER

It is advisable to periodically check the condition of the filter cartridge. If dirt is observed, it must be
clean or replace it. Remember that a clogged filter produces a drop in the flow of water, can cause a
malfunction of the Spa. The Spa should always operate with the pre filter and filter cartridge placed
correctly. Never place objects that might clog the inlet of the filter.
All spas include a filter. Check the type of your spa filter and follow the instructions.
Telescopic Pressure + Skimmer
ENG
Skimmer
27