How To Use Your Spa; Systems And Equipment - Balboa VL600S Manuel D'utilisation

HOW TO USE YOUR SPA

3. HOW TO USE YOUR SPA
Do not try to repair this control. Call your vendor for technical support.
Do not turn on the light when the spa is empty. The bulb will blow due to overheating.
Your spa has been designed for private, intermittent use only. Users are advised against
Follow all of the instructions on electrical connections described in this manual.

3.1. SYSTEMS AND EQUIPMENT

Your spa is equipped with an electronic control system that will enable you to regulate the
temperature of the water, choose the filter cycle that best suits your needs and activate the massage
pumps and the blower pump. It will also enable you to turn on your spa lighting, change its colour
and sequence. Depending on the design, your spa will have one of the following systems.
10 Spa for private use - Operating instructions
DANGER OF ELECTRIC SHOCK
Users should not try to repair parts.
having more than two 15-minute sessions per day.
Only authorised electricians should install the spa.
VL600S
VL600S
VL600S
VL700S
VL700S
2 Speed Pump
Heater
Spotlight
Circulation Pump
Massage Pumps
Turbo-Blower pump
Heater
Spotlight
Circulation Pump
2 Massage Pumps
Heater
Spotlight
Circulation Pump
Massage pump
Heater
Spotlight(s)
Circulation Pump
Massage pump
Heater
Turbo-Blower Pump
Spotlight(s)