HOW TO USE YOUR SPA
2 Massage Pump + Blower Pump
+ Spotlight (s)
3.2. CONTROL SYSTEM
(This section is for spas equiped with standard control system. Panels: VL600S, VL700S,
AUX...)
3.2.1. START-UP
Once activated, your spa will go into priming mode (Pr). Finalized priming mode, press the jet
buttons several times to ensure that none of the pumps contains air. The priming mode lasts
for at least 5 minutes. Press either the "Warm" or "Cool" button to exit the priming mode. On
completion of the priming mode, your spa will work in the standard mode (see the section Mode/
Prog).
Functions that require the use of a sequence of buttons may not be recorded if the combination of
buttons is pressed in quick succession.
VL700S
VL700S
Touch Panel
AUX
Flexible massage
Circulation pump
2 Massage pump
Heater
Turbo-Blower Pump
Spotlight(s)
Circulation pump
3 Massage pump
Heater
Spotlight (s)
Touch Panel
AUX
3 Massage Pump + Spotlight(s)
Panel Flexible massage
(Only for spas with flexible
massage)
ENG
11