Télécharger Imprimer la page

GRAUPNER BERNHARD GRUBEN Instructions De Montage page 59

Publicité

Les langues disponibles

Les langues disponibles

Maiden Run
Give all the batteries a full charge and carefully test each of the model's working systems in turn. Check that
all the non-fixed parts cannot fall off. You should now be ready for the boat's maiden run. Keep the cruiser's
speed low initially, and take your time to become accustomed to its handling characteristics. The model has
a fair turn of speed and takes quite a long time to stop. It should therefore be operated only on a fairly large
lake or other stretch of water. Don't run the boat too far from the bank until you have gained confidence in it.
We wish you many hours of pleasure building and running your model of the Bernhard Gruben.
Replacement parts
Order No.
Description
2027.2
Hull, CNC-trimmed
2027.3
Forecastle deck, main deck, CNC-trimmed
The following items are also required (not included in the kit)
Order No.
Description
4719
mc-19S 40 MHz RC set
2875
NAVY V40R speed controller
5173
REGATTA eco sailwinch (for controlling the daughter boat lift)
4101.LOSE
C577 servo (two required for controlling the stern flap, one required for the hook release)
3302
SPEED 600 BB Turbo 12 V electric motor (two required)
2591
12 V / 7 Ah lead-acid battery (two required)
1952
12 V geared pump (two required)
2736
Micro Speed 10 (for simulating the Schottel pump jet water pump)
7125
PICO 25 (for the fire monitor water pump)
2490.6
GM Power-Pack 3600 NiMH 7.2 V / 3.6 Ah (power supply for sailwinch and receiving system)
3588
Suppressor capacitor (four required in total)
3061
G2 parallel lead
3068
G2 distributor lead
2989.5
G2 plug and socket
Cable (min. conductor cross-section: 2.5 mm²) and other small parts should be selected at the builder's discretion.
Any Graupner IFS computer system (version 3 and later) can also be recommended, as these can control supplementary receivers,
making it possible to control the cruiser and the daughter boat in parallel.
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
No liability for printing errors. Technnical modifications reserved.
All manuals and user guides at all-guides.com
#0060384
04/2009
59

Publicité

loading

Ce manuel est également adapté pour:

2027