Rosenbauer HEROS-titan Info Pour L'útilisateur page 31

WARNING! Once the screw locks, do not employ force to turn it further.
Naturally, the helmet can be further adjusted during operations to the prevailing
conditions, taking into account all safety regulations.
4.2 Adjustment of the wearing height and head size adjustment
4.2. 1 Adjustment of the wearing height
The wearing height is easiest to adjust when the interior fittings are removed.
1
1
1: Fixing points front
2: Fixing points rear
The inside liner can be removed from the helmet
without tools by first loosening both front fixing
points (see Fig. 1) and then both rear fixing points
(see Fig. 2).
The axle must then be removed from the rotary
knob, thus allowing the inside liner to be removed
(see Fig. 3).
Using the rear headbands as shown in Fig. 4, the wearing height can now be
adjusted with the aid of six adjustment positions. Be sure to adjust both bands
equally.
WARNING: When adjusting the sliders, attention should be paid to the audible locking
of the slider following setting, in order that the safety function of the interior harness is
guaranteed.
2
Loosen axle
HEROS-titan – Rosenbauer
3
4
EN
31