Rosenbauer HEROS-titan Info Pour L'útilisateur page 28

Rosenbauer – HEROS-titan
2.3 Visor specifications
Inspected acc. to standard: EN 14458:2004 C 0299
157350
157351
15735402
15735403
(+) Certified for fire fighting use
Face guard
Eye guard
Ω
Electrical properties
See manufacturer information
The following optional requirements are satisfied 2-1,2 Protection standards for
filter performance -40°C/+120°C applied extreme temperatures acc. to 5.3.5
T Resistance to with medium energy impact at extremes of temperatures acc. to
5.5.3.
K Abrasion resistance acc. to procedure 5.5.5.a) / EN 14458
N Resistance to fogging
2.4 Resistance against chemicals
The HEROS-titan helmet, together with the visors, has been inspected for
resistance against the following chemicals according to EN 443 / 5.15 and
EN 14458 / 5.2.16:
Sulphuric acid 30 % (aqueous solution)
Sodium hydroxide 10 % (aqueous solution)
p-xylene, undiluted
Butan-1-ol, undiluted
n-heptane, undiluted
3. DESIGN
3.1 Helmet shell
The helmet shell is covered with a functional paint coating (impact resistant).
If the paint coating is damaged, it may affect the protective function of the
helmet; therefore, the damage must be repaired by a professional immediately.
3.2 Helmet internal fitting
The helmet internal fitting allows the optimum adjustment of the helmet ensuring
a perfect fit to the head. The complete helmet liner can be easily removed from
the helmet without tools for cleaning and adjustment purposes. The covering of
the headband can either be produced in textile (standard) or leather (optional).
The novel method of adjusting the headband to the relevant head size from the
28
Face protection visor, clear
Face protection visor, goldvaporised
Eye protection visor, clear
Eye protection visor, tinted