Publicité
Test pressure point (if fitted)
9
Test pressure point (if fitted)
The test pressure point (pressure check valve) is fitted under the hob (Fig. 7, page
11).
Removing and mounting this test pressure point (pressure check valve) must be
performed by a qualified gas service engineer. Gas pressure is related to the type of
gas used to supply the appliance. Refer to chapter GAS in this manual.
10 Warranty
The statutory warranty period applies. If the product is defective, please contact
the local manufacturer in your country (the address is on the back of the instruction
manual) or your reference specialised dealer.
For repair and warranty processing, the following documents must be included
when sending the appliance:
● a copy of the receipt showing the date of purchase;
● a reason for the claim or a description of the fault.
44
EN
Publicité
