Publicité
Use
Manual ignition of the hob
If the electronic ignition does not work, the manual ignition is used as a substitute.
CAUTION!
Ignition must be done without any cookware or other object on the
burners.
h
To generate the flame, fully press down the control knob (Fig. 5 6, page 10)
and turn it to the large flame position (Fig. 5 2, page 10).
h
Simultaneously ignite the burner with a match or gas lighter.
h
Once the flame has been generated, press the knob down for a few seconds so
that the flame remains lit.
CAUTION!
If the burner does not turn on:
● check that there is gas in the cylinder.
If the device does not work, close the gas inlet tap and contact your
dealer.
Regulating the hob flame
h
To adjust the flame, turn the knob to the desired position (Fig. 5 6, page
10).
40
EN
Publicité
