Qilive Q.6391 Manuel D'utilisation page 11

3. Remove the top left screw cover.
4. Move the core cover from left side to right side. And then
lift the upper door and place it on a padded surface to
prevent it from scratching.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace
both adjustable feet.
7. Place the door back on. Ensure the door is aligned
horizontally and vertically so that the seals are closed on
all sides before finally tightening the top hinge.
8. Insert the hinge bracket and screw it to the top of the unit.
9. Use a spanner to tighten it if necessary.
9 9
EN