Panasonic CF-72 Serie Mode D'emploi page 19

First-time Operation
Create BACKUP Disks for Reinstallation
For reinstallation( page 23), create backup disks. To create backup disks, the SuperDisk
Drive (CF-VFS712) and formatted 2HD floppy disks are needed.
Power off your computer.
1
A BACKUP DISK cannot be created if the SuperDisk drive is inserted in the multimedia
pocket with the power of the computer on.
Remove the CD-ROM drive and set the SuperDisk drive in the multimedia pocket, or
2
connect the USB floppy disk drive. (
3 Make sure a disk is not in the write-protected state and
set it, then select [Start] - [Programs] - [Panasonic] -
[Create BACKUP DISK] and follow the on-screen instruc-
tions.
Windows 2000
When [You do not need to make
"BACKUP DISK"] is displayed, there
Windows NT
is no need to create a BACKUP DISK.
Place a label identifying the contents on each disk.
4
Names of created BACKUP DISK
FIRSTAID FD (When the display for creating the UPDATE FD is shown, create the
disk by following the on-screen instructions.)
CAUTION
Store the disks in a safe place. They will enable you to return your computer to factory
default settings should any problems occur.
When creating disks and the message [Insufficient files to copy] is displayed, press
[OK] then contact Panasonic Technical Support.
While the MP indicator (
or use the standby or hibernation function (
Functions").
When creating disks, do not run any other application program.
Be sure to create the BACKUP DISK.
If a BACKUP DISK is not created, it will be impossible to return the computer to its
original state. In this case, contact Panasonic Technical Support.
"Multimedia Pocket")
) is on, do not remove the disk, power down your computer
Eject Button
Label-side up
Insert the shutter-side
headfirst.
"Standby/Hibernation
19