GRAUPNER PARAT Instructions De Montage page 23

All manuals and user guides at all-guides.com
182* Return drum
183 Console
184 Winch cable
185* Bell
The components marked in the parts list with an asterisk (*) are ready-made items which are included
in the fittings set, Order No. 457; they are not included in the basic kit.
You will also need the following items (included in the kit):
1 decal sheet
4 self-tapping screws, 2.2 Ø x 9.5 (winch mounting)
4 self-tapping screws, 2.2 Ø x 9.5 (mounting plate 164)
4 self-tapping screws, 2.2 Ø x 9.5 (mounting servo plate 18)
3 grubscrews, M3 x 3 (pushrod connector - 2, fire cannon - 1)
2 M2 nuts (pushrod connector)
8 hose ties, Order No. 1521.52
2 collets, 7/4 Ø (tiller)
2 retaining screws, M3 x 5 (tiller)
2 washers, 9/4.3 Ø x 0.8 (tiller)
1 retaining screw, 2.9 Ø x 9.5 (lift mechanism)
1 washer, 6/3.2 Ø (lift mechanism)
You will also need the following items (not included in the kit):
1 fittings set
2 Voith-Schneider power units
or 2 Schottel drive units 1
2 lead-acid batteries, 12 V/7 Ah
1 geared pump, 12 V
Radio control system
1 mc-24 radio control set
1 1/5-ch Nautic Multi-Split module
1 1/5-ch Nautic Multi-Split decoder
2 2-channel proportional module
1 Power V 60 speed controller
1 REGATTA ECO winch
4 C 4041 servos
2 C 577 servos
1 Mini Switch
Plan texts
1 Side elevation
2 Stern view, superstructure (excl. funnel and mast)
3 Stern view, superstructure
1 Plastic Ready made
1 Wood dowel 10 Ø x 30
1 Thread 1000
1 Plastic Ready made
Order No. 457
Order No. 2358
Order No. 1761
Order No. 2591
Order No. 1651
Order No. 4817
Order No. 4140
Order No. 4139
Order No. 4152
Order No. 2847
Order No. 5173
Order No. 3916
Order No. 4101
Order No. 3294