Advanced Bionics CPI-3 Mode D'emploi page 7

ll manuals and user guides at all-guides.co
Sound processor
programming
* Functionality not available with current software release.
Programming Equipment
You will use the following tools when fitting a patient:
•
Clinical Programming Interface (CPI-3) —
Provides a bridge between the computer's USB port
and the sound processor. Additionally, the CPI-3
delivers power from the computer's USB port to
the connected sound processor during the fitting
procedure.
•
SoundWave software (version 2.2 and later) installed
and running on a PC. You will use SoundWave to
create, customize, and download programs to your
patient's sound processor(s). Please refer to the
SoundWave manual for further instructions.
6
Top view
cable
Figure 2: Top & bottom views of the CPI-3
Bottom view
Micro-USB
Trigger*
(blue rim)
Audio*
(black
rim)