Rear Derailleur - Shimano UM-6T80A-006 Mode D'emploi

UM-5XZ0A-006

Rear Derailleur

IMPORTANT NOTICE
• Contact the place of purchase or a distributor for information on
installation, adjustment, and replacement of the products which are
not found in the user's manual. A dealer's manual for professional
and experienced bicycle mechanics is available on our website (https://
si.shimano.com).
For safety, be sure to read this "user's manual"
thoroughly before use, follow it for correct use,
and store it so that it can be referenced at any time.
The following instructions must be observed at all times in order to
prevent personal injury and physical damage to equipment and
surroundings. The instructions are classified according to the degree of
danger or damage which may occur if the product is used incorrectly.
DANGER
WARNING
CAUTION
Important Safety Information
WARNING
• Do not disassemble or modify the product. This may cause the product
to not operate correctly, and you may suddenly fall and be seriously
injured.
• Never use alkali based or acid based solvents, such as rust cleaners. If
those solvents are used the chain might break and cause serious
injury.
• Clean the chain with an appropriate chain cleaner regularly. Intervals
between maintenance depend on the use and riding circumstances.
• Check the chain for any damage (deformation or cracking), skipping,
or other abnormalities such as unintended gear shifting. If any
problems are found, consult your place of purchase or a distributor.
The chain may break, and you may fall.
Notice
• For SHADOW RD+, be sure to check that the plate unit cover and the
plate unit cover cap are installed before riding the bicycle.
• If gear shifting operations cannot be carried out smoothly, clean the
shifting unit and lubricate all moving parts.
• The gears should be periodically washed with a neutral detergent. In
addition, cleaning the chain with neutral detergent and lubricating it
can be an effective way of extending the life of the gears and the
chain.
• Products are not guaranteed against natural wear and deterioration
from normal use and aging.
• For maximum performance we highly recommend SHIMANO
lubricants and maintenance products.
User's manual
Failure to follow the instructions will result
in death or serious injury.
Failure to follow the instructions could
result in death or serious injury.
Failure to follow the instructions could
cause personal injury or physical damage
to equipment and surroundings.
Regular Inspections Before Riding the Bicycle
Before riding the bicycle, check the following items. If any problems are
found, consult your place of purchase or a distributor.
• Is gear shifting carried out smoothly?
• Has excess play increased in the links?
• Has excess play increased in the pulleys?
• Are there any abnormal noises coming from the derailleur?
• Is there any noticeable damage on the chain?
Names of parts
* The shape differs depending on the model.
Some models do not have a cap.
Lever switch
Links
Pulleys
How to operate
When removing the rear wheel, be sure to first move the lever switch to
the OFF position.
It is recommended to move the lever switch to the ON position while
riding to reduce chain slap and to help prevent the chain from falling
off the sprockets.
* The shape and position of the lever switch differ depending on the
model.
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
© Jun. 2020 by SHIMANO INC. ITP
Plate unit cover
Pulleys
Axle release lever
Cap