Publicité
Les langues disponibles
Les langues disponibles
7. CONTROL PANEL WITH LCD
DISPLAY AND MENU TREE.
7.1. LCD SCREEN.
The UPS provides useful information about the UPS itself, the load
status, events, measurements and configuration.
On-Line mode
indicator
(green)
Escape
Fig. 59. LCD screen.
The following table shows the indicator statuses and their
description:
Indicator
Status
On
On
On
!
On
Tab. 14. Indicator status.
The following table shows the status of the buttons and their
description:
USER MANUAL
Battery mode
Bypass mode
indicator
indicator
indicator
(orange)
(orange)
Up
Down
Enter
On/off
button
Description
The UPS is operating normally in On-Line or
High Efficiency mode.
The UPS is operating in Battery mode.
The UPS is operating in Bypass mode.
The UPS has an active alarm or fault. See
troubleshooting for more information.
Button
Fault
(red)
Tab. 15. Button status.
Function
Illustration
Press the button for > 100 ms and < 1 s
Power On
to start the UPS without mains input
but with the battery connected.
With the UPS powered, press the
On
button for >1 s to start it up.
By pressing the button > 3s, the UPS
Shutdown
will turn off.
Go up
Press to scroll up the menu.
Restore main
Press to restore the automatic display
screen
on the main screen.
Go down
Press to scroll down the menu.
Lock main
Press to lock the LCD home screen on
screen
the main screen.
Enter the
Select/Confirm the current selection.
menu
Press to exit the current menu and
Exit the current
change to the main menu or the higher
menu
level menu without changing the
configuration.
SLC TWIN PRO3/RT3 4÷10 kVA UNINTERRUPTIBLE POWER SUPPLIES (UPS)
77
Publicité
