Using the supplied screws, fix the two rack supports on each
1.
side of the UPS, ensuring that the correct support is fixed to the
corresponding side.
Fig. 24. Installing the UPS in the rack cabinet.
To install the device in a rack cabinet, the support side guides
2.
(optional) are needed.
Place the device on the guides and insert it all the way.
3.
Depending on the model and weight of the device, and/or
depending on whether it is installed on the top or bottom of
the cabinet, it is recommended that two people perform the
installation operations.
Fix the UPS to the cabinet frame using the screws supplied
4.
with the supports.
Installation of the UPS and a battery module in a rack
cabinet.
Fig. 25. Installation of the UPS and battery module in the rack
cabinet.
Using the supplied screws, fix the two rack supports on each
1.
side of the UPS, ensuring that the correct support is fixed to the
corresponding side. Repeat the same procedure for the battery
module.
To install the unit in a rack cabinet, the support side guides
2.
(optional) are needed.
Assemble the guides at the required height, ensuring the
3.
correct tightening of the fixing screws and the proper fit in the
machining, according to each case.
Place the device on the guides and insert it all the way. Proceed
4.
in the same way for the battery module.
66
Depending on the weight of each unit according to the type of
5.
device and battery module, and/or whether it is installed on
the top or bottom of the cabinet, it is recommended that two
people perform the installation operations.
Fix the UPS and battery module to the cabinet frame using the
6.
screws supplied with the respective supports.
Vertical tower-type installation.
Press the button on both sides of the front panel with force in
1.
order to remove it.
Fig. 26. Removing the front panel.
Press the button on both sides of the LCD display to remove it.
2.
Fig. 27. Unlock to rotate the LCD display.
Rotate the LCD display 90º.
3.
Fig. 28. Rotation of the LCD display.
SALICRU