Publicité
Les langues disponibles
Les langues disponibles
WARNING
This icemaker uses HFC-free refrigerant
(propane) and HFC-free foam insulation that
are non-ozone-depleting and environmentally
sustainable materials having very low global
warming potential.
The HFC-free refrigerant is flammable and
sealed in the refrigeration system. Although
the refrigerant does not leak out under normal
usage, take utmost care when handling this
icemaker so as not to cause any damages to
the system. In the case of accidental damage
to the refrigeration system causing refrigerant
leak, do not create a source of ignition in the
area. Do not operate electrical switches or
plugs in the area, do not use naked flame.
Immediately ventilate the area by opening doors
and/or windows, and call service engineer.
IMPORTANT
1. I n o r d e r t o c a r r y o u t s a f e a n d p r o p e r
installation of the product, please read this
booklet carefully beforehand and follow the
instructions contained within.
2. On completion of the installation, start up
the icemaker to check for any abnormalities,
and instruct the user on how to use and
maintain the icemaker in accordance with the
Instruction Manual.
3. This booklet should be handed over to the
user after the installation and be preserved
by the user together with the Instruction
Manual for any further consultation that may
be necessary.
WARNING
The installation must be carried out by
qualified personnel, in accordance with current
regulations, according to the manufacturer's
instructions.
1. UNPACKING
WARNING
Children should not be allowed in reach of
the packaging elements (plastic bags and
expanded polystyrene) as they are potential
sources of danger.
CAUTION
1. Do not lift or manoeuvre the carton by using
the shipping bands.
2. R e m o v e s h i p p i n g c a r t o n , t a p e ( s ) a n d
All manuals and user guides at all-guides.com
Note: This icemaker needs a Storage Bin. The
1) After removing the packaging, make sure that
2) Remove the shipping tape holding the panels.
3) Remove the Front, Top and Side Panels. See Fig.
1
packing. If packing material is left in the
icemaker, it will not work properly.
Power Supply Cord
Top Panel
Air Filter
Louver
Front Panel
Fig. 1
recommended Storage Bin is HOSHIZAKI
ICE STORAGE BIN, Model B-300SD(PD) or
B-500SD(PD) with Top Kit - 8C, B-700SD(PD)
with Top Kit - 22C, or B-900SD(PD) with Top
Kit - 22C and Top Kit - 8C.
the icemaker and the Storage Bin are in good
condition. If in doubt, please do not use the
equipment but apply to professionally qualified
personnel. See the instruction sheet attached to
the Storage Bin for its unpacking and installation
guidelines.
2.
Front Panel
Top Panel:
Remove the screw(s). Lift off.
Front Panel: Remove the screw. Lift up and pull
toward you.
Side Panel:
Remove the screw. Pull slightly
toward you, and lift off.
Fig. 2
ENGLISH
Operation Panel
Top Panel
Side Panel
Publicité
