i-tec C31DUALDPDOCKPD Mode D'emploi page 9

i-tec USB-C Dual DP Display Dock with PD 100 W
Display option 1
Display option 2
In Scaled mode click on the required icon, the resolution is displayed below
(which looks like this, 3008x1692 = 4K@30Hz)
16 | ENGLISH
Closed-display mode – It is possible to work on the connected monitor
when the Mac monitor is closed, but you will require power supply and
mouse and keyboard connection. More information can be found here:
https://support.apple.com/en-us/HT201834
When the power supply is ensured from the battery, the use of a HDMI
monitor is limited by the Mac. In some situations in case of problems
with displaying it is possible to solve it by disconnecting the USB-C cable
of the docking station from the USB-C port on the Mac and reconnecting
it after approximately 10 s. Please wait for completion of connection
of all peripherals. Most problems with renewing the screen on the
connected monitor after hibernation of the Mac, after using screensaver,
after restarting the Mac, after turning the Mac OFF / ON can be solved
by the same way.
The majority of problems with the docking station and the connected
peripheral devices can be solved by disconnecting the USB-C cable of
the docking station from the USB-C port of the PC / Mac / smartphone
and reconnecting after approximately 10 s.
SAFETY INSTRUCTIONS
• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – you will prevent it from slipping
and falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user
manual.
FREQUENTLY ASKED QUESTIONS
Available on our website www.i-tec.cz/en/ on the "FAQ" tab of this
product.
Quick Start
ENGLISH | 17