Trix H0 BR 96 Manuel D'instructions page 5

Function
22013, 22017:
• This model is designed for operation with H0 2-rail
DC systems (track according to NEM standards) with
conventional DC power packs (12 volts).
• This locomotive is equipped with an Trix interface con-
nection for digital operation and can be retrofitted with
the 66839 Trix locomotive decoder.
• Headlights change over with the direction of travel and
vary in brightness according to the voltage present in
the track.
22012, 22016:
• Possible operating systems: NEM direct current (± 12
volts DC), DCC System (NMRA standard).
• Selectrix operation: Central Control 2000 must be set
for DCC operation for this train.
• Different controllable light and sound functions when
the model is operated with DCC.
• Headlights change over with the direction of travel and
vary in brightness according to the voltage present in
the track, when the unit is operated with direct current.
• Only available with DCC operation: Different parame-
ters can be set (address, maximum speed, accelera-
tion delay, braking delay, volume). Address set at the
factory: 03.
All manuals and user guides at all-guides.com
22012, 22013, 22016, 22017:
• The track layout must have sufficient interference sup-
The necessary maintenance that will comes due with
normal operation is described below. Please see your
authorized Trix dealer for repairs or spare parts.
No warranty or damage claims shall be accepted in those cases
where parts neither manufactured nor approved by Trix have
been installed in Trix products or where Trix products have been
converted in such a way that the non-Trix parts or the conversion
were causal to the defects and / or damage arising. The burden
of presenting evidence and the burden of proof thereof, that the
installation of non-Trix parts or the conversion in or of Trix products
was not causal to the defects and / or damage arising, is borne by
the person and/or company responsible for the installation and / or
conversion, or by the customer.
Safety Information
• This locomotive is only to be used with the operating
• This locomotive must not be supplied with power simul-
• Please make note of the safety information in the
• Trix motor vehicles must not be operated on digital
pression before operating trains with DC power packs.
A suitable interference suppressor for Trix C Track is
item no. 611 655.
system it is designed for.
taneously by more than one power source.
instructions for your operating system.
systems without an in-built engine decoder (Motor can
be damaged!).
5