Leister FUSION 2 Instructions D'utilisation page 11

Conformity
Leister Process Technologies, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland
confirms that this product, in the version as brought into circulation through us, fulfils
the requirements of the following EC directives.
Directives:
Harmonized Standards: EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
Kaegiswil, 09.07.2009
Disposal
Power tools, accessories and packaging should be sorted for environmental-
friendly recycling. Only for EC countries: Do not dispose of power tools into
household waste! According to the European Directive 2002/96/EC on waste
electrical and electronic equipment and its incorporation into national law,
power tools that are no longer suitable for use must be separately collected
and sent for recovery in an environmental-friendly manner.
Technical Data
Voltage
Power consumption
Frequency
Air flow (20°C)
Air temperature
Plasticizer temperature °C
Welding output * Ø 3 kg/h
Welding output * Ø 4 kg/h PE 1.3 – 1.8 PP 1.3 – 1.8 PE 2.0 – 3.5 PP 1.5 – 2.7 PE 2.0 – 3.5 PP 1.5 – 2.7
(*Average values at 50 Hz)
Welding rod
Size L × W × H
(without welding shoe)
Weight
Mark of conformity
Mark of approval
Certification scheme
Protection class II
All manuals and user guides at all-guides.com
2004/108, 2006/95.
EN 61000-3-3, EN 50366, EN 62233, EN 60335-2-45.
Bruno von Wyl,
Technical Director
FUSION 2
#
V~ 230
W 2800
Hz 50/60
l/min ca. 300
°C max. 340
max. 300
mm Ø 4 ± 0.2
(in accordance with DVS 2211)
mm 450 × 98 × 225
kg 5.9 with 3 m cable
2
3
CCA
4
Christiane Leister
Owner
#
Mains voltage is not reversible
FUSION 3C
#
230
2800
50/60
ca. 300
max. 350
max. 320
PE 1.6 – 2.3 PP 1.3 – 2.0 PE 1.6 – 2.3 PP 1.3 – 2.0
Ø 3 / Ø 4 ± 0.2
(in accordance with DVS 2211)
588 × 98 × 225
6.9 with 3 m cable
2
3
CCA
4
FUSION 3
#
230
3500
50/60
ca. 300
max. 350
max. 320
Ø 3 / Ø 4 ± 0.2
(in accordance with DVS 2211)
690 × 98 × 187
7.2 with 3 m cable
2
3
CCA
4
11