Leister FUSION 2 Instructions D'utilisation page 10

Operating Instructions
Please read operating instructions carefully before
use and keep for further reference.
Leister FUSION 2 / 3C / 3
Hand-Extruder
Application
Welding PE and PP thermoplastics for applications in
• container engineering
• plastic fabrication
10
All manuals and user guides at all-guides.com
• pipeline construction
• landfill sites and abandoned polluted areas
Warning
DANGER!
Danger when opening up the tool, as live components and
connections are exposed. Therefore, before opening it,
unplug the tool to ensure disconnection from the mains.
Electronically conductive material (eg PE-EL) must not be
welded.
Incorrect use of the hand extruder (eg overheating of the
material) can present a fire and explosion hazard, especially
near combus t ible materials and explosive gases.
Do not touch the element housing, air nozzle and
discharging plastizised material when they are hot as
they can cause burns. Let the tool cool down. Do not
point the hot air flow and the discharg ing plastizised
material in the direction of people or animals.
Caution
The voltage rating stated on the tool must correspond to
120
the mains voltage.
230
For personal protection on building sites we strongly recom-
FI
mend the tool be connected to a RCCB (Residual Current
Circuit Breaker) .
The tool must be operated under supervision. Heat can
ignite flammable materials which are not in view.The
machine may only be used by qualified specialists or under
their supervision. Children are not authorized to use this
machine.
Protect tool from damp and wet.
GB