Etekcity EK7090 Manuel De L'utilisateur page 9

Manual Power Off
Press and hold
Zero / Tare Function
Whenever you measure items inside a container, you can use the tare
function to remove the container's weight from the final measurement.
1. Tap
the screen does not display "
to zero.
2. Place the container on the center of the scale.
3. Wait for the reading on display to stabilize. The screen will display
the container's weight.
4. Tap
display "
5.
Place the item in the container. The scale will measure the liquid or
items, without including the weight of the container.
6. When you're done, reset the scale by removing all weight and
tapping
for 2 seconds to turn off the scale.
to turn on the scale. Make sure the scale shows "
to tare the weight of the container. The screen should now
".
again.
Figure 2.1
" automatically, tap
9
". If
to adjust
2.1]
[Figure