Etekcity EK7090 Manuel De L'utilisateur page 8

Using Your Scale
Note:
• For accurate results, always place the scale on a hard, dry, flat surface,
and keep the scale away from dirt, dust, vibrations, wind, air currents, and
electromagnetic interference.
• When you turn on the scale, choose units, or use the tare function, wait for the
scale to read "
General Operation
1.
Place the scale on a hard, flat, level surface for measurement.
2. Tap
Tap
on the right of the display.
3. Place your item on the scale.
4. Wait for the reading on the display to stabilize.
Unit Conversion
To change the unit of measurement, tap
desired unit of measurement.
Automatic Power Off
To save battery power, the scale will automatically power off after 180
seconds of inactivity.
" again before measuring.
to turn on the scale. Make sure the scale shows "
to select your desired measuring unit, which will show
until the display shows the
8
".