Fluval Shaker Led: Parts; Important Safety Instructions - Fluval SHAKER Mode D'emploi

READ THOROUGHLY PRIOR
TO INSTALLATION AND OPERATION
IMPORTANT: FULLY ASSEMBLE THE CABINET BEFORE REMOVING THE TANK FROM ITS BOX AND NEVER PLACE THE
AQUARIUM ON ANY SURFACE OTHER THAN THE CABINET TO PREVENT DAMAGE TO THE AQUARIUM BASE.
FLUVAL SHAKER LED:
PARTS
The Shaker Aquarium kit contains two separate packages.
Carefully remove all components from the packaging and
make sure that nothing is missing or damaged.
1 package including:
1x glass tank (A), 2x sliding top covers (B),
1x LED Strip light (C) + LED driver with instruction manual,
1x plastic bag with 4x cable guides (D) and 1x over rim
cable guide (E) with bi-adhesive pad,
1x Fluval filter, with its instruction manual,
1x heater with its instruction manual
1 package (supplied separately) including:
the disassembled cabinet and the top wooden frame to
apply to the glass tank, with instruction manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To guard against injury, basic safety precautions should be observed when handling the LED Strip Light, including
the following:
1. For the complete enjoyment, use and understanding of this product, READ AND FOLLOW ALL SAFETY
INSTRUCTIONS and all important notices on the appliance before using. Failure to do so may result in loss of fish life
and/or personal injury or damage to the unit.
2. DANGER – To avoid possible electrical shock, special care should be taken due to the close proximity of the LED Strip
Light to water. For each of the following situations, do not attempt repairs yourself; return the appliance to an authorized
service facility for service or discard the appliance. (See Customer Service information at the end of this manual).
If the unit falls into the water, DON'T reach for it! First unplug it and then retrieve it. If the electrical components of the
appliance get wet, unplug the appliance immediately.
Carefully examine the appliance after installation. It should not be plugged in if there is water on parts not intended to
be wet.
Do not operate any appliance if it has a damaged cord or plug, or if it is
malfunctioning, dropped or damaged in any manner. The power cord of this
appliance cannot be replaced; if the cord is damaged, the appliance must be
discarded. Never cut the cord.
To avoid the possibility of the appliance plug or wall socket getting wet,
position the unit to one side of a wall mounted socket to prevent water from
dripping onto the socket or plug. A "drip loop" (see illustration) should be
arranged to the socket. The "drip loop" is that part of the cord below the level
of the socket (or the connector if an extension cord is used), to prevent water
travelling along the cord and coming into contact with the wall socket. If the
plug or socket does get wet, DON'T unplug the cord. Disconnect the fuse or
circuit breaker that supplies power to the appliance. Then unplug and examine
for presence of water in the wall socket.
3. WARNING - Close supervision is necessary when any appliance is used by or near children. This appliance can be
used by children ages 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not
be made by children without supervision. This product is not a toy.
B
C
D
E
A
B
D
A
C
E
3