Publicité
EXTERNAL CONNECTIONS
Memory dump / download
The host device can request a memory dump / download of the last 72H patient data. Also,
the results can be downloaded to a printer or to a personal computer (PC). The monitor
automatically stores the measured patient data over the last 72 hours according to the FIFO
(First In, First Out) principle. Data are stored whenever values are displayed e.g. during
patient monitoring. The memory will indicate blank spaces for those time intervals in which
no values are displayed e.g. while the sensor is placed in the calibration/ storage chamber
or while the monitor is turned off.
Heading and data lines content
Column pos. 1: Date and time
Heading line:
$<date>,
$2006.30.07,
Data line:
<time>,
11:22:33,
Column pos. 2: PCO2 value
Heading line:
PCO2[<unit>]<limit>,
PCO2[mmHg]
0012:0123,
PCO2[kPa_]01.2:12.3,
Data line:
<value>,
0123,
----
EEE,
23.4,
--.-,
EE.E
Column pos. 3: PCO2 alarm status
Heading line:
PCO2s,
Data line:
<code>,
N,
A,
S,
Column pos. 4: SPO2 value
Heading line:
SPO2[%]<limit>,
SPO2[%]90:098,
SPO2[%]90:---,
Data line:
<value>,
087,
---,
Column pos. 5: SPO2 alarm status
Heading line:
SPO2s,
Data line:
<code>,
N,
A,
S,
102
Date of the next data line, format "yyyy.mm.dd"
Time of the actual data line, format "hh:mm:ss"
Indication of the PCO2 unit in "mmHg" or "kPa_"
and alarm limits "low:high" valid for the next data
lines.
PCO2 value in "mmHg" out decimal point or in
"kPa" with decimal point.
Indication of "----" or "--.-" if no value is available.
Indication of "EEE" or "EE.E" if the value is out of
range.
No heading parameter
Possible codes are:
"N" no alarm
"A" alarm active
"S" alarm muted, reset
Indication of the SPO2 alarm limits "low:high"
valid for the next data lines.
Indication of "---"if no value is available.
No heading parameter
Possible codes are:
"N" no alarm
"A" alarm active
"S" alarm muted, reset
TOSCA
500
Publicité
