BRAND Dispensette S Mode D'emploi page 59

d.
4. Cleaning the piston and cylinder and reassembling the instrument
Special instructions for Dispensette
®
For the Dispensette S Organic, slide the piston into the cylinder vertically with a rotating motion.
a.
Cleaning Digital model
The stop segment must engage underneath the cylinder's stop ring. When tightening the piston
mounting nut using the assembly tool, use your thumbs to press the piston/cylinder unit back to-
wards the back side of the housing.
9974 90
e.
Then carefully pull the piston out of the cylinder.
NOTICE
®
S Organic
a.
Clean the piston and cylinder and reassemble the instru-
ment. If necessary carefully remove deposits at the edge
of the glass cylinder.
b.
Rinse the piston and cylinder with deionized water, and
dry them carefully.
c.
Insert the piston completely into the cylinder and then
reassemble the instrument. The piston can only be in-
serted into the cylinder when the discharge tube is at-
tached.
NOTICE
Right
Wrong
10 Cleaning
59
Operating manual