Mettler Toledo InPro 86 ie Serie Manuel D'instructions page 12

12
3 Product description
InPro 86X0 i e
30 421 372 D
3.1 Scope of delivery
Standard supply of the sensor is made up of the following:
– instruction manual
– certificates in accordance with the specifications
– blanking plate
On receipt of the shipment, check immediately:
– The sensor and accessories for any sign of transport damage. Report any damage immedi-
ately to the carrier and to your supplier.
– The type designation on the sensor body.
– For completeness of the supply. Please notify your supplier immediately if the shipment is
incomplete or in any way incorrect.
3.2 Packing
The packing consists of cardboard and foam plastic. Keep the packing for possible later use, such
as for storage or transport of the sensor. However, if you wish to dispose of the packing, please
observe your local regulations in this respect.
3.3 Sensor designation
Type designation
Sensor designation, product part number, serial number, material specifications as well as maxi-
mum permissible pressure and temperature can be noted from the product type plate.
Always include the product part number and serial number as minimum for clear identification
when communicating with the manufacturer.
InPro 86X0 i e
1 = single-angle version (25°)
3 = dual-angle plus color version (25° and 90° plus color)
MODEL:Turbidity Sensor InPro8630ie
型号：浊度传感器 InPro8630ie
PS:16 bar
TS:-10°C ~ 120°C
P/N:
30541121
1155
S/N:
1019902
Example sensor label (UKCA will be available from the beginning of 2022).
METTLER TOLEDO
www.mt.com/pro
梅特勒-托利多仪器(上海)有限公司
地址：上海市桂平路589号
邮编：200233
Mettler-Toledo GmbH
Im Hackacker 15
8902 Urdorf,Switzerland
Made in China by
METTLER-TOLEDO
© 06 / 2021 METTLER TOLEDO Group, CH
Product description