CAME VLR01DX Manuel D'installation page 32

VLR02 operator Master and Slave connection
Attach the adhesive cable strips ❻.
Connect the Slave gearmotor to the Master operator using the wired cable ❼ to the MOTOR1 terminal.
In this way, the right-hand leaf will open first.
If you need the left-hand leaf to open first while keeping the Master to the right, exchange the MOTOR1
and MOTOR2 connectors.
Manual release of the operator
Activating the manual release could result in the shutter moving inadvertently due to possible mechanical failures or
balance issues.