Publicité
Les langues disponibles
Les langues disponibles
EN
Safety instructions
- Suitable material: air
- Inlet temperature 40 degrees Celsius, outlet temperature less than 180 degrees Celsius.
- The recommended filter change frequency is 250 hours, depending on the quality and quantity of the filter.
- Pressure limit 0.1 Mpa, lubrication system temperature less than 70.
CAUTION: Incorrect oil content during cold start , clogged oil filter or valve malfunction can cause oil shortage.
CAUTION: Hot surfaces.
Requirements for valve maintenance and testing
- Release valve: When the inside of the valve loses control and when the pressure is above the valve, the release valve will open automatically to protect
the machine.
- Safety valve: When the pressure regulator loses its effectiveness, the pressure in the tank will be 1.1 times the indicated pressure, the safety valve will
open automatically to protect the machine.
NOTE: Both of the above valves are strict safety settings and any alteration to these settings is strictly forbidden.
CAUTION: Use only connections and hoses that are suitable for use with air compressors.
Suggestion: For pressures above 7 Bar , the supply hoses should be fitted with a safety clamp, e.g. not wire rope.
- Deviation from an horizontal position is prohibited.
Before transporting the air compressor
- Lift the base.
- Confirm that the linkage is securely fastened.
- Confirm that a safety harness is fitted in order to stop the machine if necessary.
- Confirm that the cables are correctly connected.
- Ensure that the brake is not engaged, where fitted.
- Carry out proper cleaning of connected hoses and equipment.
- If the brake is not activated, place plugs in front of the wheels.
The following brief repair instructions describe the method of working during repair/service. Repair/service should only be performed by an authorized
service center.
Repair/service instructions
1. The use of the spare parts list is important.
2. Follow the schedule for inspection and replacement of consumable parts.
3. The procedure should always be carried out by authorized technical personnel.
4. Always use the spare parts recommended by the manufacturer. Contact your supplier for details if necessary.
5. Always take appropriate safety measures during repair and maintenance.
Before repairing and maintaining the machine, follow the following precautions for your own safety.
1. Unplug the machine from the power outlet.
2. Take protective measures in case of false start.
3. Check and assess the general condition of the machine.
4. Take precautions in case the machine should be operated at some stage of maintenance or repair.
5. The machine should not be used in an area with flammable materials that may cause an explosion.
Operating temperature: 0
to 40
o
Information on transport, operation and storage of the machine.
1. Always take into account the dimensions, volume, and center of gravity of the machine.
2. Operating instructions (e.g. drawings showing the use of components)
Information on the use of the machine.
1. Appropriate use.
2. Description of switches.
3. Settings.
4. Ways to stop the machine.
5. Risks that can be eliminated by the protective measures taken by the operator.
6. Risks which may arise depending on the use.
7. Misuse and inappropriate use of the machinery.
8. Personal protective equipment required by the user during operation.
Information on maintenance.
1. Frequency of safety checks.
2. Instructions on maintenance operations that require technical knowledge and should only be carried out by an authorised service technician.
3. Instructions for maintenance (changing parts) that do not require technical knowledge may be performed by the operator.
In case of emergency, turn off the power.
4
C / Storage temperature: 40
C to 70
o
o
WWW.NIKOLAOUTOOLS.GR
C.
o
Publicité
