Télécharger Imprimer la page

HOMCOM 823-041V80 Manuel D'instructions page 13

Publicité

Les langues disponibles

Les langues disponibles

BUTTONS
A. TIMER BUTTON
Set a time (1-24-hours) for the air conditioner to turn on or off. When a 'Time Delay' is
programmed, the timer indicator light will illuminate.
While the air conditioner is operating:
1. Press the 'Timer' button.
2. Press the 'Up/Down' arrow to select the number of hours you want the air conditioner to
work before turning off.
While the air conditioner is off:
1. Press the 'Timer' button.
2. Press the 'Up/Down' arrow to select the number of hours you want the air conditioner to
work before turning off.
NOTE: Wait approximately five seconds for the settings to save.
To cancel the timer:
● Press the 'Timer' button once, the hours remaining will flash, then press the timer button
again and the timer will be canceled.
B. FAN SPEED BUTTON
When the air conditioner is in use, the fan can be adjusted from low to high.
NOTE: The fan speed cannot be adjusted when the unit is in 'Dry' mode.
● Press the 'Fan Speed button' to switch speeds. The fan speed indicator will illuminate.
C. UP AND DOWN ARROW BUTTONS
Adjusts the temperature or hours in 'Time Delay'.
To Set the Temperature:
The temperature can be set between 62-86º F (17-30º C) when the air conditioner is in
'Cool' mode.
1. Press the 'Mode' button until the 'Cool' mode is selected.
2. Press the up or down arrow to select a temperature.
NOTE: The temperature cannot be set when in 'Fan' or 'Dry' mode.
NOTE: Press the up and down arrows at the same time to choose between ºC or ºF being
displayed.
D. CONTROL PANEL DISPLAY
Displays the set temperature in degrees Fahrenheit or degrees Celsius, or the hours
remaining in a time delay.
E. MODE BUTTON
Press the 'Mode' button to change modes. The corresponding indicator will illuminate:
Cool – Cools the room to the set temperature
Dry – Reduces the humidity in the room
Fan – Circulates the air in the room without cooling
F. POWER BUTTON
Turn the air conditioner on/off.
NOTE: Pressing the power button does NOT disconnect the appliance from the power
supply.
G. SLEEP MODE BUTTONS
Select 'Sleep' mode by pressing the 'Timer' and the 'Down' arrow at the same time.
13

Publicité

loading

Ce manuel est également adapté pour:

823-041v81