HOMCOM 823-041V80 Manuel D'instructions page 10

Remove packaging materials. Save the carton and the foam packaging for storing the
air conditioner when not in use. NOTE: There are NO packing materials inside the air
conditioner to remove - do not open the cabinet.
Properly dispose of/recycle all packing material.
Handle the air conditioner gently.
Keep the air conditioner upright and level. Do not set the air conditioner on its side,
front, back or upside down.
STEP 3 - CONNECT EXHAUST HOSE TO THE AIR CONDITIONER
IMPORTANT: When connecting the hose, the air conditioner must be close enough to the
window, so you will not dislodge the window seal plate. Once the hose is connected, move
the air conditioner 20" (51 cm) from the wall.
A. Slide the exhaust hose assembly from the outer air outlet to the right.
B. The assembly is completed when the convex point of the inner joint and the concave
point of the air outlet are stuck.
STEP 4 - INSTALL WINDOW PANELS
Depending on the size of your window opening, use the main panel and one or both of the
extension panels.
A. Open the window and place the main window panel there.
NOTE: The window assembly is designed to accommodate either a vertical or horizontal
slide window.
Vertical Slide Window Horizontal Slide Window
10