Télécharger Imprimer la page

Graf KLARO Easy im Carat XL Notice Pour L'installation, L'utilisation Et L'entretien page 33

Publicité

Les langues disponibles

Les langues disponibles

2. Notes
2.1
Safety
The national accident prevention regulations must be observed during all work. Particularly when inspect-
nd
ing the tanks, a 2
person is required for safety reasons.
In addition, the relevant national regulations and standards must be observed during installation, assem-
bly, maintenance, repair work, etc.
During all work on the system or parts thereof, always shut down the entire system and secure it against
unauthorised re-start.
Always keep the tank cover closed, except when working in the tank. Otherwise, there is a high risk of an
accident occurring. Only genuine GRAF covers or covers that GRAF has approved in writing must be
used.
GRAF offers an extensive range of accessories, which are all coordinated to each other and can be ex-
panded to form complete systems. The use of other accessories may impair the functionality of the sys-
tem and invalidate liability for any resulting damage.
2.2
Assembly tool
The tool used to install the stainless steel hose clamps must be stainless steel. Otherwise, the stainless
steel parts that have come into contact with the non-stainless steel tool may rust.
2.3
Aeration and ventilation
All containers are to be aerated and ventilated. Additional ventilation pipes or vents must be fitted if nec-
essary. Ventilation pipes should be arranged to allow for natural ventilation (chimney effect).
2.4
Installation of the tanks
2.5
Labelling of the tanks
For installations with more than 2 tanks, the tanks are assigned numbers. The numbers can also be found
in the technical drawings.
2. Notes
To install the Carat XL and Carat XXL tanks, follow the installation instruc-
tions for the tanks. Please pay particular attention to the installation condi-
tions of the tanks.
/

Publicité

loading

Ce manuel est également adapté pour:

Klaro easy im carat xxl