Publicité
Les langues disponibles
Les langues disponibles
6.4.1
Assembling the metal exterior control cabinet L
Technical data
Protection class:
IP44
Material:
Sheet steel 1.5 mm,
powder coated
Colour:
RAL 7032
Dimensions:
800 x 880 x 675
W x H x D [in mm]
Foundation:
Solid foundation is
to be provided by
the customer, for
foundation plans re-
fer to page 24.
6. Assembling the exterior control cabinet
An excavation with the following dimensions is to be
made at the planned site:
Exterior cabinet L
Length approx. 585 mm
Width approx. 315 mm
Depth approx. 600 -
640 mm
The empty conduit and the air hoses must be routed
into the prepared excavation.
The foundation base for the exterior cabinet Univer-
sal is to be assembled according to the accompany-
ing assembly instructions.
The cabinet is then to be inserted vertically into the
excavation to a depth of approx. 60-64 cm. Make
sure that the cabinet is stable and secure and is
installed vertically.
/
Publicité
