Assembling and dismantling the
two-piece shaft
Assembly
•
Loosen the coupling by turning the knob counter-
clockwise.
•
Align the tab of the attachment (A) with the arrow on
the coupling (B).
B
•
Push the attachment into the coupling until the
attachment snaps into place.
•
Before using the unit, tighten the knob securely.
64 – English
ASSEMBLY
A
Dismantling
•
Loosen the coupling by turning the knob (at least 3
times).
•
Push and hold the button (C). While securely holding
the engine end, pull the attachment straight out of the
coupling.
C
Fitting the loop handle
•
Clip the loop handle onto the shaft. Note that the loop
handle must not be fitted in front of the arrow marked
on the shaft.
•
Slide the spacer into the slot in the loop handle.
•
Fit the nut, knob and screw. Do not overtighten.
•
Now make a final adjustment to give yourself a
comfortable working position. Tighten the knob.