Overflow Opening
is located on the back
of the motor base. It
directs liquid away
from the motor in
case of a leak. If you
experience leaks, refer
to Tips and Techniques
on page 8.
Motor Base
Control Panel
is used to select variable speed,
pulse or program settings,
depending on your model.
Refer to Control Panel on page 7
for more information.
(Your blender may differ from
this picture)
6
p
a r t S a n d
Spill-Proof Vented Lid
with removable lid plug
(top rack dishwasher safe)
DO NOT use in a microwave)
40 ounce (1.2 L) Container
shatter-resistant container
(top rack dishwasher safe,
DO NOT use in a microwave)
Interlock Tab
Both containers have two
interlock tabs that must be
positioned in the cutouts in
the motor base for the motor
to operate.
f
e at u r e S
20 ounce (0.6 L) Container
(top rack dishwasher safe,
DO NOT use in a microwave)
Two seals are supplied with your
blender. Refer to page 8 for more
information about seals.
(top rack dishwasher safe)
DO NOT use in a microwave)
Interchangeable Blade Base
is used to blend in with the 20 ounce (0.6 L)
and 40 ounce (1.2 L) containers
(top rack dishwasher safe)
DO NOT use in a microwave)
is used to maintain circulation by preventing
air pockets in the 40 ounce (1.2 L) container.
See page 9.
(top rack dishwasher safe)
Flip-Top Lid
The seal MUST be in place to
avoid leaks when using the
20 ounce (0.6 L) container as
a to-go cup.
(top rack dishwasher safe,
DO NOT use in a microwave)
Seals
Tamper