Publicité
Les langues disponibles
Les langues disponibles
B
l e n d i n g i n t h e
DO NOT use your 20 ounce (0.6 L) cup to heat ingredients or to blend hot
liquids. Heated ingredients and liquids may create internal pressure which
could cause the cup to burst and cause injury.
DO NOT continuously use your machine for more than 75 seconds with the
20 ounce (0.6 L) cup.
If a cup becomes warm to the touch or steams or vents, immediately stop
blending ingredients and turn off or unplug blender. Allow the cup and
ingredients to cool to room temperature before removing the blending
adapter.
Parts will become hot with extended use.
DO NOT touch the drive socket in the motor base or the drive spline in the
adapter.
To avoid damage or personal injury, DO NOT use the cups (including the adapter
or lids) in the microwave.
This icon corresponds to suggested recipes for the 20 ounce (0.6 L)
container in your cookbook.
1.
To begin, put a seal on the bottom thread of the blade base.
The seal should fit snugly and evenly around the thread.
2.
Load the 20 ounce (0.6 L) container according to the recipe.
DO NOT blend hot liquids.
3.
Thread the blade base onto the 20 ounce (0.6 L) container in
a clockwise direction just until tight. DO NOT overtighten or
leaking can occur.
4.
With the variable speed control pointed at the stop
symbol (O), invert the 20 ounce (0.6 L) container
so the blade assembly is on the bottom. Place the
container on the motor base. The interlock tabs on
the 20 ounce (0.6 L) container will lower into the
cutouts in the motor base.
5.
Begin blending by slowly turning the variable speed
control to the desired variable speed setting or left
of center to pulse. Follow the recipe guidelines to
finish the blend.
6.
Wait until the blades come to a complete stop
before removing the container from the motor base.
7.
Invert the 20 ounce (0.6 L) container. Unthread the blade base from
the container in a counter-clockwise direction.
8.
Put a seal on the flip-top lid. The seal should fit snugly and evenly
around the bottom thread of the flip-top lid.
9.
Thread the flip-top lid onto the 20 ounce (0.6 L) container in a
clockwise direction until just tight. DO NOT overtighten or leaking
can occur.
10. To open the flip-top lid, hold the container with one hand, press the two tabs on lid with the other hand
and lift up to release.
2 0
( 0. 6 l )
o u n C e
WARNING
Liquids
Dry Goods
Soft Fruits and Veggies
Ice and Frozen Ingredients
C o n ta i n e r
Seal
Blade Base
(water, juice, yogurt)
(grains, seasonings, powders)
Leafy Greens
Flip-top Lid
Seal
20 ounce (0.6 L)
Container
SCALE 1.000
SCALE 1.000
11
Publicité
