Télécharger Imprimer la page

Inventum GF800HLD Mode D'emploi page 18

Publicité

Les langues disponibles

Les langues disponibles

3
prior to first use
Before using the appliance for the first time, proceed as follows: Carefully unpack your appliance and remove all packaging material
and possible promotional stickers. Keep the packaging (plastic bags and cardboard) out of reach of children. After unpacking the
appliance, carefully check it for external damage that may have occurred during transport. Place the appliance on a sturdy, flat and
heat-resistant surface.
The control keys are touch controls. Carefully touch the controls with a finger to activate them. At each touch of a touch control,
you can hear a sound signal.
STAND-BY
When the plug is inserted in the socket, a sound signal can be heard. The stand-by key lights up.
The appliance automatically switches to stand-by mode when:
• inserting the plug in the socket;
• no keys are touched for 1 minute;
• the time set on the timer has passed;
• when pressing [STANDBY] while the appliance is working.
SWITCHING ON/OFF
Switch the appliance on and off with [STANDBY].
• The appliance will only function when the basket is in the appliance correctly.
• Once the timer is on 00:00, it will count down 20 seconds again. During that time, the fan continues to run to cool the appliance.
After that, a sound signal can be heard.
PRIOR TO FIRST USE
Check the voltage. The appliance will only work safely on alternate current with a voltage that is indicated on the information plate
of the appliance. Only insert the plug of the appliance into a earthed socket The heating element has been provided with a protective
layer. Switch on the appliance and allow it to operate at maximum level without food for 10 minutes. In this way, the protective layer
around the heating element is burned off perfectly. A little bit of smoke may be created during this action. Therefore ensure sufficient
ventilation. When the protective layer has disappeared, switch off the appliance.
Remove the plug from the socket and clean the insert grille and baskets before you actually start using the appliance. Wash the insert
grilles and baskets with soapy water or in the dishwasher. The inside and outside of the appliance itself can be wiped with a soft,
damp cloth.
The appliance works with hot air. This means that you should never use oil, other liquids or frying fat for preparing food.
• Place the appliance on a sturdy, flat and heat-resistant surface.
• Place one of the insert grilles in each basket. Make sure you place the insert grille correctly: with the rubbers pointing down.
• Place the baskets in the appliance.
CAUTION! If the baskets are not placed correctly, the appliance will not function.
Do not fill the baskets with oil or other liquids.
Place nothing on top of the appliance.
Do not cover air inlet or outlet openings. Covered air openings will disrupt the air circulation and will have a negative effect
on the frying result.
SETTING TEMPERATURE AND TIME
Press [+] and [–] on the left side of the control panel to set a higher or lower temperature. The temperature changes in steps of 5 °C.
Press [+] and [–] on the right side of the control panel to set a longer or shorter time. The time changes in steps of 1 minute.
Automatic menus
Press one of the menu keys from the table:
18
English

Publicité

loading